MAX1000 gives start-ups, OEMs and educational establishments easy access to a flexible Maker Board solution based on Intel MAX10 FPGA and development tools

22 March, 2017 - Arrow Electronics has introduced a new FPGA IoT Maker Board that has been designed for end-to-end application development and optimised for cost. The Arrow MAX1000 board can be installed directly into a custom application or integrated on to a completely separate board. It has been created for start-ups, universities or established equipment manufacturers who want a flexible, low cost FPGA platform for development. Arrow can also supply customised variants.

At the heart of the maker board is a compact (11x11mm) Intel MAX10 FPGA with 8000 logic elements. This single chip includes integrated flash memory, a 1Msps 12bit ADC for analogue signals and a 3.3V power supply. Other features include embedded SRAM, DSP blocks, instant-on within milliseconds, and the ability to implement Intel’s NIOS II soft core embedded processor to perform microcontroller tasks.

The board is equipped with an integrated Arrow USB-Blaster that enables the FPGA to be programmed directly from a PC and debugged using the free of charge Intel Quartus Prime Lite software. This makes Arrow MAX1000 an easy to use plug and play solution. The Arrow USB-Blaster can also be integrated into the user’s own circuit if required.

The MAX1000’s power can be supplied as 5V from the USB port or via a separate pin. An Enpirion DC/DC converter with integrated coil then generates the 3.3V supply used on board. A MEMS oscillator provides the clock supply for the FPGA and the USB bridge. The low power, 3-axis acceleration sensor – also based on MEMS technology – can be used for position and motion detection, which are often required in IoT applications. External SDRAM can be used for storage of application data or as memory for the NIOS II processor.

To provide an easy introduction into the use of FPGAs, a series of demo projects with NIOS II soft IP controllers are provided with the MAX1000. Eight configurable LEDs are available to display status and user inputs can be made via two buttons. A two row connector, based on the Arduino MKR standard, and a PMOD plug provide flexible connectivity options including the ability to attach adaptor boards for wireless ICs or sensors.

Arrow’s MAX1000 FPGA IoT Maker Board is available now.

– Ends –

About Arrow Electronics

Arrow Electronics is a global provider of products, services and solutions to industrial and commercial users of electronic components and enterprise computing solutions. Arrow serves as a supply channel partner for more than 125,000 original equipment manufacturers, contract manufacturers and commercial customers through a global network of more than 465 locations serving over 90 countries.

Learn more at fiveyearsout.com.

Detailed information about Arrow’s operations can be found by visiting www.arrow.com

Contact for sales enquiries and publication

Arrow Northern Europe Tel: +44 (0) 1279 441 144 E-Mail: Advantageuk@arroweurope.com

Issued by:

Georgia Sorrel, Publitek Tel : +44 (0) 208429 6549 E-mail: georgia.sorrel@publitek.com Web: www.publitek.com

March 2017 Ref.: ARP006/A